发动机
- 发动机型号
-
Cat® C32 ACERT™
- 总功率
-
676 kW
- 缸径
-
145 mm
- 冲程
-
162 mm
- 排量
-
32.1 L
- 扭矩储备
-
30 %
- Emissions (Tier 2 Equivalent): Net Power ISO – 9249
-
607 kW
- Emissions (Tier 2 Equivalent): Gross Power – SAE J1995
-
676 kW
- Emissions (U.S. EPA Tier 4 Final): Gross Power – SAE J1995
-
671 kW
- Emissions (U.S. EPA Tier 4 Final): Net Power ISO – 9249
-
607 kW
- Peak Torque @ 1,200 rpm
-
4242 N·m
- Rated Speed
-
1750 RPM
重量
- 工作重量
-
101720 kg
- Operating Weight – Ripper
-
109420 kg
变速箱
- 变矩器驱动 – 前进 1 档
-
7.1 km/h
- 变矩器驱动 – 前进 2 档
-
12.4 km/h
- 变矩器驱动 – 前进 3 档
-
21.2 km/h
- 变矩器驱动 – 后退 1 档
-
7.7 km/h
- 变矩器驱动 – 后退 2 档
-
13.5 km/h
- 变矩器驱动 – 后退 3 档
-
23.5 km/h
- 直接驱动 – 前进 2 档
-
13 km/h
- 直接驱动 – 前进 3 档
-
22.8 km/h
- 直接驱动 – 后退 1 档
-
8 km/h
- 直接驱动 – 后退 2 档
-
14.3 km/h
- 直接驱动 – 后退 3 档
-
25.1 km/h
- 变速箱类型
-
Cat Planetary Power Shift
- 直接驱动 – 前进 1 档
-
Lock-up disabled
转向
- 安全阀设定值
-
34500 kPa
- 最小转弯半径（铲斗上方）
-
9550 mm
- 总转向角
-
82 Degrees
- Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi)
-
470 L/min
保养加注容量
- 燃油箱 – 标准
-
1562 L
- 冷却系统
-
200 L
- 曲轴箱
-
120 L
- 变速箱
-
169 L
- 差速器与终传动 – 前
-
369 L
- 差速器与终传动 – 后
-
342 L
- 液压系统 – 机具与制动器（仅限液压油箱）
-
326 L
- 液压系统 – 转向系统和发动机冷却风扇（仅限液压油箱）
-
290 L
- Fuel Tank – Ripper
-
1335 L
驾驶室
- 驾驶室 – ROPS/FOPS
-
Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
- 空调
-
Standard air conditioning system contains environmentally friendly R134a refrigerant
- 噪声性能
-
The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
- 驾驶室 – ROPS/FOPS
-
SAE J11040 APR88, ISO 3471:2008, ISO 3471:1994
- 防滚翻保护结构（ROPS）
-
ROPS meets SAE J11040 APR88, ISO 3471:2008 and ISO 3471:1994 criteria.
- 噪声性能
-
The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
- 噪声性能
-
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
- 噪声性能
-
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
- 防落物保护结构（FOPS）
-
FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
制动器
- 制动器
-
Meets ISO 3540:1996
铲斗
- 前端
-
Fixed
- 后端
-
Oscillating at ±10 degrees
- 最大单轮起落
-
573 mm
铲刀
- 铲刀容量
-
25 to 45 m3 (33 to 58 yd3)
型号：854K（Tier 4）
- 序列号前缀
-
H8M
型号：854K（Tier 2）
- 序列号前缀
-
H9K
液压系统 – 提升/倾斜
- Output at 1,850 rpm and 6900 kPa (1,000 psi)
-
610 L/min
- Relief Valve Setting – Lift (Large Pump)
-
22675 kPa
- Relief Valve Setting – Tilt (Small Pump)
-
24560 kPa
- 双作用油缸：侧倾和倾斜缸径与冲程
-
267 mm × 286 mm (0.88 ft × 0.94 ft)
- 双作用油缸：提升缸径与冲程
-
177 mm × 1760 mm (0.58 ft × 5.8 ft)
Hydraulic System – Ripper (Optional)
- Output at 1,850 rpm and 6900 kPa (1,000 psi)
-
212 L/min
- Main Relief Pressure
-
19325 kPa
- Cylinder, Double-acting: Lift, Bore and Stroke
-
184 mm × 454 mm (0.60 ft × 1.5 ft)
尺寸（近似值）
- 铲刀放在地面时的长度
-
13405 mm
- 至排气管顶部的高度
-
5234 mm
- 至机罩顶部的高度
-
3984 mm
- 离地间隙
-
691 mm
- 前轮轴中心线至铰接件
-
2945 mm
- 后轮轴中心线至保险杠边缘的距离
-
4195 mm
- 轴距
-
5890 mm
- 至 ROPS 顶部的高度
-
5590 mm
- Maximum Ripper Raise
-
1189 mm
- Maximum Ripper Depth
-
681 mm
- Center Line of Rear Axle to Edge of Ripper Mount
-
4200 mm
- Width Between Tines
-
1551 mm
- Departure Angle
-
14 Degrees
- Width Between Outside Tines
-
3102 mm
- Length with Blade and Ripper on Ground
-
15604 mm
|
